Read 3rd party review By Bill Esposito	LASERKERF	Gift Certificate Available
	Patent Pending
21st CENTURY LASER TECHNOLOGY FOR YOUR SAW

In addition to the installation instructions these steps are provided for classification.
1. The B-18 bracket is attached to the left side of the upper saw frame just behind the dust chute.
2, Because of a slight curve of the frame, hold the adhesive section of the bracket in position and bend the bracket so that the it is approximately level.

3. Mount the alignment block t the table, per installation sheet, and install laser.

4. The next picture shows the left side of the laser after alignment.

5. You are ready to cut.