In addition to the installation instructions these steps
are provided. Attach the B-5 bracket to the left side of the
saw as shown. If the dust chute is being used it must be moved
back as shown. Attach the Laserkerf to the bracket as high as
possible on the bracket. The beam of the laser should be directly
behind the blade.

To attach the chute make a bracket out of 1/16 AL with three holes in line spaced the same as the two holes in the chute. Place a screw thru the first hole into the right threaded hole. Place the second screw thru the right hole in the chute and the middle hole in the bracket in to the left threaded hole. Place a nut and bolt thru the left hole of the bracket and chute.