Rear Mount 1
Models: Hitachi C10FC & C2, Makita LS1020, Protech 7208
In addition to the installation instructions these steps are provided.
1. The set up of the saw shown is representative of all the saws listed above.
2. Clean the area on the back of the dust chute with alcohol or mineral spirits.
3. Remove the cover of the adhesive from the B-2 bracket and press the adhesive to the side of the blade guard as shown.
4. Find the correct position to mount the laser by placing the laser
directly behind the blade, see installation instructions, so the the beam hits the divot in the wood.
5. Remove the adhesive cover and stick the laser the bracket.
6. Horizontal adjustment is on left side.
7 Align the laser per the instructions included with the Laserkerf.