Delta 36-255/Porter Cable 3802 Installation
In addition to the installation instructions these steps are provided.
To install the Laserkerf it is necessary to remove the current chip chute and support. The B-16 bracket assist the deflection of the chips into the bag
1. First remove the C clip from the rod that holds the chip chute. Remove the rod and chute.
2. Remove the chip chute support bracket
3. Install the B-16 bracket as shown.
4. Position the laserkerf per the installation instructions.
5. Route the cables and secure with the cable clips and ties.
6. Attach the ON/Off switch